Autodesk Day Session 1 Autodesk Overview Autodesk This attached image shows 4 options for the tag. in this case i just used the material tag but it could be any tag. the standard tag has two orientations. horizontal and vertical. by creating another tag that is rotated at 45 you will get the other two options shown below. let me know if this helps. Hi i'm having a lot of trouble getting some annotative block attributes to display properly in my view. the entire file is rotated 20 degrees in order to align the project north south, but then the ucs is set back 20 degrees so everthing prints horizontally again. i have a bunch of non annotative blocks with annotative attributes inside of them.
Autodesk Answer Day Rotating Annotations Tags Autodesk Community Note: you can rotate any tags included in the annotate tab tag panel, except tread number and multi rebar annotations. select the tag. the status bar displays the category and family type for the tag. to change the orientation of the tag, use one of the following methods: to rotate the tag, click modify |
ёясй Autodesk Community Blogs ёяси Autodesk Community When i link a model and rotate it, all tags annotations doesn't follow the rotation of the model in the host (see picture attached). even if i select "model orientation" in the source model. Tags and text part 8 allow tag rotation keep default behavior as is, but allow for post creation rotation (using the rotate tool) of all tags on an as needed basis (so "align with element" only governs until "overidden" by the rotate command). I run into this often when dealing with framing tags that i want to all read the same "direction" from one end of the building to the other. a tag looks fine when it is anywhere from 0 90 degrees, but the second the element is rotated past 90 degrees, the tag flips around. Edit dynamic blocks for annotation using available grips, such as changing rotation angle and scale. let's look at the functionality of a few annotation dynamic blocks. dynamically change the length of the line. move its entire location. this would be for a section view call out. We apologize for not being able to fix this in a safe way in r2017, and we hope that this workaround will help out those who still need to have non disappearing text in these annotations. When objects in the xreffed file are edited so they move or change shape rotated objects that are constrained respond by losing their rotation. the only work a round i've found is to not constrain the tags.
Rotating The Beam Annotations Autodesk Community I run into this often when dealing with framing tags that i want to all read the same "direction" from one end of the building to the other. a tag looks fine when it is anywhere from 0 90 degrees, but the second the element is rotated past 90 degrees, the tag flips around. Edit dynamic blocks for annotation using available grips, such as changing rotation angle and scale. let's look at the functionality of a few annotation dynamic blocks. dynamically change the length of the line. move its entire location. this would be for a section view call out. We apologize for not being able to fix this in a safe way in r2017, and we hope that this workaround will help out those who still need to have non disappearing text in these annotations. When objects in the xreffed file are edited so they move or change shape rotated objects that are constrained respond by losing their rotation. the only work a round i've found is to not constrain the tags.
Rotating Equipment Tags Autodesk Community We apologize for not being able to fix this in a safe way in r2017, and we hope that this workaround will help out those who still need to have non disappearing text in these annotations. When objects in the xreffed file are edited so they move or change shape rotated objects that are constrained respond by losing their rotation. the only work a round i've found is to not constrain the tags.
Autodesk Answer Day 24 Mai 2017 Product Design Answer Day
Comments are closed.