Chapter 5 Analyzing Ethernet Lan Switching Pdf Network Switch Step 2: configure the ipv4 address for the pc. a. configure the ipv4 address, subnet mask, and default gateway address forpc a. b. from the command prompt onpc a, ping the switch address. This address is assigned by the manufacturer and stored in the firmware of the nic. this lab will explore and analyze the components that make up a mac address, and how you can find this information on a switch and a pc.
5 1 4 4 Packet Tracer Identify Mac And Ip Addresses Instructions Ig The nic compares the destination mac address in the frame with the device’s physical mac address stored in ram. if there is a match, the framed is passed up the osi layers. And to achieve that goal, switches use logic—logic based on the source and destination mac address in each frame’s ethernet header. lan switches receive ethernet frames and then make a switching decision: either forward the frame out some other ports or ignore the frame. Lab view network device mac addresses instructions part 1: configure devices and verify connectivity in this part, you will set up the network topology and configure basic settings, such as the interface ip addresses and device name. Switch hub, three pc`s equipped with at least onenic, one hub or switch and the necessary cables. once the physical lan is set up the hosts need to be configured using the ifconfig command. to verify communication among the machines the ping command is used.
Understanding Mac Addresses In Ethernet Networks Lab Course Hero Lab view network device mac addresses instructions part 1: configure devices and verify connectivity in this part, you will set up the network topology and configure basic settings, such as the interface ip addresses and device name. Switch hub, three pc`s equipped with at least onenic, one hub or switch and the necessary cables. once the physical lan is set up the hosts need to be configured using the ifconfig command. to verify communication among the machines the ping command is used. Ethernet devices refer to an arp table (or the arp cache) in its memory (i.e., ram) to find the mac address that is mapped to the ipv4 address. a device will search its arp table for a destination ipv4 address and a corresponding mac address.
Understanding Mac Address And Layer 2 Networking Explained With Ethernet devices refer to an arp table (or the arp cache) in its memory (i.e., ram) to find the mac address that is mapped to the ipv4 address. a device will search its arp table for a destination ipv4 address and a corresponding mac address.
Ccna 200 301 Chapter 5 Analyzing Ethernet Lan Switching Pdf
Explore Ethernet Mac Addresses Configure Connect Analyze Course Hero
Comments are closed.